Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
equipment:roland-dpx-3300 [2021/11/05 16:45]
benev
equipment:roland-dpx-3300 [2021/11/05 17:00] (current)
benev
Line 51: Line 51:
  
 You can check the pens are working before starting your plot by using the pen select buttons on the plotter. If you can press the appropriate button and the plotter picks up your pen, then the pen holder is being properly detected and it will work properly when you start your plot. You can check the pens are working before starting your plot by using the pen select buttons on the plotter. If you can press the appropriate button and the plotter picks up your pen, then the pen holder is being properly detected and it will work properly when you start your plot.
 +
 +==== Pen Force ====
 +The default pen force seems to be tuned to felt-tip pens. For Gel pens, you need more force. You can change the force mid-plot by pausing it, holding down Fast / Pen Force and selecting the pen force you want. It can also be set up in Inkscape.
  
 ===== Accessing from C ===== ===== Accessing from C =====
  • equipment/roland-dpx-3300
  • Last modified: 4 weeks ago
  • by benev