Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
equipment:reflow-oven [2019/05/04 00:26]
felix.h ↷ Page moved from reflow-oven to equipment:reflow-oven
equipment:reflow-oven [2020/03/18 20:42] (current)
whitecf Added picture.
Line 1: Line 1:
 ===== Solder Reflow Oven ===== ===== Solder Reflow Oven =====
 +{{ :​equipment:​solder_reflow_oven.jpg?​nolink |}}
 ==== Set up ==== ==== Set up ====
- 
    - Open oven and remove the Arduino and platform.    - Open oven and remove the Arduino and platform.
    - Thermistor should be taped to the rack. Make sure that it is not close to the heating element.    - Thermistor should be taped to the rack. Make sure that it is not close to the heating element.
  • equipment/reflow-oven.1556926019
  • Last modified: 11 months ago
  • by felix.h