Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
equipment:prusamk3 [2020/07/25 13:34]
nick_gover
equipment:prusamk3 [2020/07/25 13:36] (current)
nick_gover
Line 37: Line 37:
  
 ===== Software ====== ===== Software ======
-==== Slicing ==== +The computer at the Hackspace with PrusaSlicer ​on has some issuesso you may find it is more time-efficient to slice files on your own computer. Download the latest version of PrusaSlicer [[https://​www.prusa3d.com/​drivers/​ | here]]. Make sure you select the options for Original Prusa MK3S with a 0.4mm nozzle when you install and start up the software for the first time.
-There is a computer at the Hackspace with PrusaSlicer ​and an SD card reader. However, you may find it is more time-efficient to slice files on your own computer. Download the latest version of PrusaSlicer [[https://​www.prusa3d.com/​drivers/​ | here]]. Make sure you select the options for Original Prusa MK3S with a 0.4mm nozzle when you install and start up the software for the first time.+
  
 **Only use the default Printer Settings in PrusaSlicer.** You are welcome to tweak Filament Settings and it is in your best interests to change Print Settings for every print. If you save your settings on the Hackspace computer, put your initials at the beginning, e.g. "NG 0.3mm Layers Super Quick"​. **Only use the default Printer Settings in PrusaSlicer.** You are welcome to tweak Filament Settings and it is in your best interests to change Print Settings for every print. If you save your settings on the Hackspace computer, put your initials at the beginning, e.g. "NG 0.3mm Layers Super Quick"​.
- 
- 
-==== Control Software ==== 
-It is strongly recommended that you print from an SD card using the LCD interface. However if you need to use Pronterface,​ only use the version of Pronterface on the Hackspace computer or downloaded from the link above. 
  • equipment/prusamk3
  • Last modified: 3 weeks ago
  • by nick_gover