Floor Standing Belt/Disc Sander - Clarke CS6-9C
Clarke CS6-9C Belt & Disc Sander
- 750 Watts (1.0hp) 230V induction motor
- 6“ x 48” belt tilts & locks at any angle from 0 to 90°
- 9“ (230mm) sanding disc
- Spring adjuster to regulate belt tension
- 190mm x 317mm sanding table that is adjustable between 0 & 45°. Can be used with either sanding belt or disc.
- Complete with finger guard on belt, full disc guarding & mitre fence on sanding table.
Consumables
- equipment/floor-standing-belt-disc-sander
- Last modified: 22 months ago
- by ryandh