Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
equipment:cnc_mill [2020/04/25 22:17]
alexrowe
equipment:cnc_mill [2020/05/31 19:30]
alexrowe Noise warning added
Line 5: Line 5:
 <callout title="​Induction Required"​ type="​warning"​ icon="​true">​ This equipment requires an induction prior to use. For your own safety and to avoid damage to the equipment do not attempt to use it until you have been inducted. </​callout>​ <callout title="​Induction Required"​ type="​warning"​ icon="​true">​ This equipment requires an induction prior to use. For your own safety and to avoid damage to the equipment do not attempt to use it until you have been inducted. </​callout>​
  
 +<callout title="​Loud Equipment"​ type="​warning"​ icon="​true">​ This equipment is extremely loud. Ensure that you and those in the room are wearing ear defenders. Hearing damage is permanent and debilitating. </​callout>​
 ====How do CNC machines work?==== ====How do CNC machines work?====
-The following videos give a much better explanation than this author can+  * The following videos give a much better explanation than this author can
   * Where Mach3 is mentioned, we use bCNC   * Where Mach3 is mentioned, we use bCNC
-  * [[https://​youtu.be/​YBGqknN3gGs|CNC Basics 1]] + 
-  * [[https://​youtu.be/​J4bMAIEFCYU|CNC Basics 2]]+{{youtube>​YBGqknN3gGs?​medium}}{{youtube>​J4bMAIEFCYU?medium}}
  
 ====What is it?==== ====What is it?====
Line 19: Line 20:
   * It can cut many things:   * It can cut many things:
     * Tested:     * Tested:
-      * Aluminium, carefully+      * Aluminium 
 +        * lubrication is critical 
 +      * Titanium 
 +        * the hackspace logo on the door was machined from titanium 
 +        * lubrication is critical 
 +        * slow cuts can cause work hardening
       * Steel - a small experiment has been carried out, more attempts needed       * Steel - a small experiment has been carried out, more attempts needed
       * Wood, quite easily       * Wood, quite easily
Line 25: Line 31:
       * Plastics       * Plastics
       * Carbon composites       * Carbon composites
-      * Titanium?! - approach with extreme trepidation 
       * Human Fingers       * Human Fingers
  
Line 40: Line 45:
     * Hold the button to unlock the door     * Hold the button to unlock the door
     * This only works when the machine has power     * This only works when the machine has power
-    * There is an intention to interlock this to the spindle motor, but this hasn't happened yet+    * The spindle motor is interlocked ​to the cover - it will not turn when the cover is open. The cover 
   * Other buttons   * Other buttons
     * They do nothing     * They do nothing
Line 59: Line 64:
   * Metal chips can scratch your eyes   * Metal chips can scratch your eyes
     * They will likely get stuck to the door and then fall on you when you open it. Watch out for this!     * They will likely get stuck to the door and then fall on you when you open it. Watch out for this!
 +  * If you tell the machine to move, it will move, regardless of whether your fingers are in the way
 +  * The compressor is extremely loud, and will probably start as soon as you power the machine on
 +    * warn others in the room, so they can use hearing protection
 ====How do I make something with it?==== ====How do I make something with it?====
   * Have you watched the videos linked further up the page?   * Have you watched the videos linked further up the page?
     * watch them     * watch them
-  * design your part in CAD software +  * design your part in Fusion 360 - or CAD software ​of your choice 
-  * use CAM (computer-aided manufacture) software to create the g code (.nc file)+  * use CAM (computer-aided manufacture) software to create the g code (.nc file) - ideally use Fusion 360 for this as well
   * transfer this to the CNC mill computer   * transfer this to the CNC mill computer
   * on the desktop, press "run bCNC"   * on the desktop, press "run bCNC"
Line 77: Line 85:
     * grumble to yourself and others     * grumble to yourself and others
     * try again     * try again
 +====Feeds & Speeds====
 +{{:​equipment:​20191129_173024.jpg?​400|}}
 +
 +The result of poor Feed/Speed selection!
 +
 +  * Feerate: How fast the spindle is moved accross the workpiece (mm/min)
 +  * Speed: How fast the spindle turns (RPM)
 +  * The combination of these factors, along with the cut depth determines the forces on the tool
 +  * The free mobile app FSWizard is very useful for selecting the right speed/feeds in an intuitive manner. https://​app.fswizard.com/ ​
 +  * Because of the cheap spindle motor driver, the mill has very low power below 10'000 RPM. Therefore, it is better to use smaller tools, which use higher spindle speeds.
 +  * Maximum spindle speed: 24'000 RPM
 +
 +====What is a collet?====
 +{{:​equipment:​single-er-11-collet-6-00-5-50mm-swiss-quality-116523-en-g.jpg?​400|What a lovely collet}} {{:​equipment:​20200530_121457.jpg?​400|Drawer full of collets, nicely lined up}}
 +
 +  * A collet holds the tool nicely in the spindle
 +  * Select the correct one for the diameter of the tool shaft
 +  * Ensure it clicks fully into the holder on the spindle
 +  * Insert the tool
 +  * Tighten the holder onto the spindle using the big spanners
 +
 +{{:​equipment:​20200530_121543.jpg?​400|Oh dear, not properly inserted}} {{:​equipment:​20200530_121555.jpg?​400|Nicely seated}} {{:​equipment:​20200530_121510.jpg?​400|The collet goes in the black part}} {{:​equipment:​20200530_121618.jpg?​400|Big Ol' Spanners}}
  
 ====What is the build volume?==== ====What is the build volume?====
  • equipment/cnc_mill
  • Last modified: 5 weeks ago
  • by alexrowe