Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
equipment:a0_laser_cutter:software [2019/10/25 14:00]
kit.wallace
equipment:a0_laser_cutter:software [2019/10/25 14:40]
kit.wallace added OpenSCAD
Line 31: Line 31:
 \\ \\
 The main program will not work without a licence, however Lasercut53_Demo.exe in the installation directory will work and import DXF files. File -> Save is disabled in this demo however if you exit the program the save dialogue has not been removed, therefore this can be used to check your DXF files and configure your cutting parameters at home. See [[silvertail_a0_laser_cutter_prep|LaserCut 5.3 File Preparation]]. The main program will not work without a licence, however Lasercut53_Demo.exe in the installation directory will work and import DXF files. File -> Save is disabled in this demo however if you exit the program the save dialogue has not been removed, therefore this can be used to check your DXF files and configure your cutting parameters at home. See [[silvertail_a0_laser_cutter_prep|LaserCut 5.3 File Preparation]].
 +
 +== Lightburn ==
 +
 +[[https://​lightburnsoftware.com/​ | Lightburn]] is a popular, more functional laser controller application,​ but sadly only the proprietory LaserCut software will work with the MPC6515 controller in our laser cutter.
  • equipment/a0_laser_cutter/software
  • Last modified: 10 months ago
  • by kit.wallace