This is an old revision of the document!


* Small

19/11/20

Awaiting Approval

Nic M

I'd like to install some poly carbonate shielding around the lathe to make it safer for bystanders when the lathe is in use.

This has been suggested by Russ who's leading the lathe expedition.

I'll buy materials in, cut and screw it in place. This will be hackspace funded.

With the shielding in place it will protect other people in the same room as the lathe from swarf and debris caused by machining.

£200

delete as appropriate

  • full funded by Hackspace

The hackspace wiki

Committee Sanity Check:

delete as appropriate

  • A majority committee vote is needed for all proposals:
  • A large purchase proposal needs to be passed by the committee before members can vote on it.
  1. x
  2. x
  3. x

Supporting Members:

delete as appropriate

  • A small proposal needs 5 member votes:
  1. x
  2. x
  3. x
  4. x
  5. x


Go back to the proposals page.

  • botlab/hsproposals/proposal_2020-07-27-lathe-shield.1605809036
  • Last modified: 13 months ago
  • by nicmarshall