Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
botlab:hsproposals:hsproposals_2018-12-11-prusa-mk3 [2018/12/17 10:52]
nick_gover
botlab:hsproposals:hsproposals_2018-12-11-prusa-mk3 [2019/05/04 00:08]
felix.h ↷ Page moved from hsproposals_2018-12-11-prusa-mk3 to botlab:hsproposals:hsproposals_2018-12-11-prusa-mk3
Line 11: Line 11:
  
 ====Current Status:==== ====Current Status:====
-Awaiting approval at a members' meeting+Purchased
  
 ====Proposer:==== ====Proposer:====
Line 31: Line 31:
 To allow the current Hackspace computer to be used with the Prusa MK3, I reccommend using an SD card reader. If there isn't already one at the hackspace or one isn't donated [[https://www.amazon.co.uk/Anker%C2%AE-Reader-RS-MMC-Support-Warranty/dp/B00LFIXC8I/ref=sr_1_5?s=computers&ie=UTF8&qid=1543504695&sr=1-5&keywords=sd+card+reader|here]] is one we can buy. To allow the current Hackspace computer to be used with the Prusa MK3, I reccommend using an SD card reader. If there isn't already one at the hackspace or one isn't donated [[https://www.amazon.co.uk/Anker%C2%AE-Reader-RS-MMC-Support-Warranty/dp/B00LFIXC8I/ref=sr_1_5?s=computers&ie=UTF8&qid=1543504695&sr=1-5&keywords=sd+card+reader|here]] is one we can buy.
  
-Filament will be supplied by the hackspace. This will be under a separate medium purchase proposal so it can be added to the consumables list. I propose that the hackspace only supplies PLA. Although the Prusa MK3 can print ABS and ASA, I propose that we limit the use of these materials as they produce unpleasant fumes during printing. Other materials (e.g. PETG, TPU, "PLA plus" and similar, "Flexible PLA", PMMA, HIPS, Nylon) should be supported, but not supplied by the hackspace. Materials with abrasive components (including, but not limited to, metal-fill, carbon fibre strengthened and glow in the dark filaments) should not be used with the new hackspace printer, although if the membership requires in the future, [[https://e3d-online.com/hardened-steel-nozzles-v6|hardened nozzles]] are available to allow these materials to be printed.+PLA filament will be supplied by the hackspace. This will be under a separate medium purchase proposal so it can be added to the consumables list. I propose that the hackspace only supplies PLA. Although the Prusa MK3 can print ABS (and ASA, HIPS etc.) I propose that we limit the use of these materials as they produce unpleasant fumes during printing. Other materials (e.g. PETG, TPU, "PLA plus" and similar, "Flexible PLA", PMMA, Nylon) should be supported, but not supplied by the hackspace. Materials with abrasive components (including, but not limited to, metal-fill, carbon fibre strengthened and glow in the dark filaments) should not be used with the new hackspace printer, although if the membership requires in the future, [[https://e3d-online.com/hardened-steel-nozzles-v6|hardened nozzles]] are available to allow these materials to be printed.
  
 ====Proposed Purchase: ==== ====Proposed Purchase: ====
Line 60: Line 60:
 A large purchase proposal needs a majority vote at a quorate meeting (see [[large_proposal_process|large purchase props]] for more info). Proxy votes are included. A large purchase proposal needs a majority vote at a quorate meeting (see [[large_proposal_process|large purchase props]] for more info). Proxy votes are included.
  
-Go back to [[hs_proposals| proposals page]]+Go back to [[botlab:hsproposals:start| proposals page]]
  • botlab/hsproposals/hsproposals_2018-12-11-prusa-mk3
  • Last modified: 3 years ago
  • by felix.h