Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
equipment:prusamk3 [2019/06/12 18:43]
nick_gover
equipment:prusamk3 [2019/06/30 11:03] (current)
nick_gover
Line 34: Line 34:
  
 ==== Sourcing Filament ==== ==== Sourcing Filament ====
-Pretty much any filament not in the Banned Filaments section is suitable for use with the Prusa MK3, but below is a list of suppliers ​that produce decent filament. +Pretty much any filament not in the Banned Filaments section is suitable for use with the Prusa MK3, some suppliers ​are listed here: [[resources:sources_of_materials_and_services|Sources of Materials and Services]].
- +
-[[http://​www.faberdashery.co.uk | Faberdashery]]\\ +
-[[https://​rigid.ink ​rigid.ink ​]]\\ +
-[[https://​www.filamentive.com | Filamentive]]+
  
  
 ===== Software ====== ===== Software ======
 ==== Slicing ==== ==== Slicing ====
-There is a computer at the Hackspace with PrusaControl,​ Slic3r Prusa Edition ​and an SD card reader ​that you can use. However, you may find it is more time-efficient to slice files on your own computer. Download the latest ​versions ​of PrusaControl and Slic3r Prusa edition ​[[https://​www.prusa3d.com/​drivers/​ | here]].Make sure you select the options for Original Prusa MK3 with a 0.4mm nozzle when you install and start up the software for the first time.+There is a computer at the Hackspace with PrusaSlicer ​and an SD card reader. However, you may find it is more time-efficient to slice files on your own computer. Download the latest ​version ​of PrusaSlicer ​[[https://​www.prusa3d.com/​drivers/​ | here]]. Make sure you select the options for Original Prusa MK3S with a 0.4mm nozzle when you install and start up the software for the first time.
  
-**Only use the default Printer Settings in Slic3r Prusa Edition.** You are welcome to tweak Filament Settings and it is in your best interests to change Print Settings for every print, but do not save over the default settings. If you save your settings on the Hackspace computer, put your initials at the beginning, e.g. "NG 0.3mm Layers Super Quick"​.+**Only use the default Printer Settings in PrusaSlicer.** You are welcome to tweak Filament Settings and it is in your best interests to change Print Settings for every print. If you save your settings on the Hackspace computer, put your initials at the beginning, e.g. "NG 0.3mm Layers Super Quick"​.
  
  
 ==== Control Software ==== ==== Control Software ====
 It is strongly recommended that you print from an SD card using the LCD interface. However if you need to use Pronterface,​ only use the version of Pronterface on the Hackspace computer or downloaded from the link above. It is strongly recommended that you print from an SD card using the LCD interface. However if you need to use Pronterface,​ only use the version of Pronterface on the Hackspace computer or downloaded from the link above.
  • equipment/prusamk3
  • Last modified: 3 weeks ago
  • by nick_gover