Welcome to the Bristol Hackspace Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
a0_laser_cutter [2019/04/07 20:52]
felix.h Layout revision, update links to correct namespace
a0_laser_cutter [2019/04/07 23:17] (current)
felix.h
Line 9: Line 9:
 === Inductions === === Inductions ===
 All users MUST be inducted prior to using the laser. Please request an induction on the Google Group and familiarise yourself with the documentation prior to attending your induction. All users MUST be inducted prior to using the laser. Please request an induction on the Google Group and familiarise yourself with the documentation prior to attending your induction.
 +
 +[[silvertail_a0_laser_cutter_induction|Induction notes (Old)]]
  
 ===== Instructions ===== ===== Instructions =====
Line 26: Line 28:
  
  
-\\ 
-[[silvertail_a0_laser_cutter_induction|Induction notes (Old)]] 
- 
-[[Step by step usage|Deprecated/​Old London Hackspace info]] 
  
 ===== Materials ===== ===== Materials =====
Line 52: Line 50:
 [[https://​smokeandmirrors.store/​pages/​just-add-sharks-support-page|Suppler FAQ Page]] [[https://​smokeandmirrors.store/​pages/​just-add-sharks-support-page|Suppler FAQ Page]]
  
-{{::​blacknosemanualv0.2.pdf|User Manual}} - This is for the A1 Blacknose but the A0 Silvertail is the same design.+{{lasercutter:​blacknosemanualv0.21.pdf|User Manual}} - This is for the A1 Blacknose but the A0 Silvertail is the same design.
  
 {{:​dimensions1.pdf| Dimensions for Just Add Sharks Laser Cutters}} {{:​dimensions1.pdf| Dimensions for Just Add Sharks Laser Cutters}}
Line 63: Line 61:
  
 =====Maintenance===== =====Maintenance=====
 +=== Files ===
 +{{:​lasercutter:​focus_tool_ecp.zip|Focus_Tool.ecp}}
 +
 +{{:​lasercutter:​just_add_sharks_software.zip|Retention_Clips_x10.ecp}}
 +
 === Maintenance Schedule === === Maintenance Schedule ===
 == Weekly Maintenance Operations == == Weekly Maintenance Operations ==
  
-  * Inspect ​the mirrors and lenses ​for dirt +  * Visually inspect ​the three mirrors and lens for dirt or damage - clean only if necessary 
-  * Remove ​the bed and clean it +  * Remove bed, remove waste and clean cutting area 
-  * Oil the linear bearings +  * Check chiller filter - clean if necessary 
-  * Check the cooling system ​Water level, Hoses, Pump Filter, Bubbles in the laser tube+  * Check chiller water level fill with distilled water if necessary
            
 == Monthly Maintenance Operations == == Monthly Maintenance Operations ==
  
-  * Clean the mirrors and lenses ​   ​ +  * Clean the mirrors and lens 
-  * Check the alignment  +  * Check mirror ​alignment ​and make adjustments if necessary 
-  * Check for dirt build up in the extraction system +  * Check the extraction system ​for damage or dirt build-up 
-  * Check bed is level+  * Oil the linear bearings 
 +  * Check the bed is level 
 +  * Check chiller hoses for signs of wear 
 +  * Check laser tube is free of bubbles
            
 === Laser Tube === === Laser Tube ===
Print/export
QR Code
QR Code Just Add Sharks Silvertail A0 Laser Cutter (generated for current page)